PROFI-CAR MOTOR OIL ADDITIVE + MoS2 – Engine Oil Additive with Molybdenum Disulfide 300ml

PROFI-CAR MOTOR OIL ADDITIVE + MoS2 is a high-performance engine oil additive formulated with molybdenum disulfide (MoS2) to reduce friction and wear inside the engine. According to PROFI-CAR, the MoS2 forms a highly load-bearing lubricating film on friction and sliding surfaces, helping improve protection during demanding operating conditions.

The additive is designed to improve the wear-protection characteristics of engine oils and increase operational reliability, particularly under high-temperature conditions. Its friction-reducing properties help lower mechanical resistance between moving engine components and support smoother engine operation.

PROFI-CAR states that the product can help reduce fuel consumption and oil consumption, while also lowering toxic emissions. The formulation is intended to improve the effective performance of the engine oil while providing additional long-term protection for the engine.

The extremely fine MoS2 particles are designed to provide lubrication during cold starts and emergency operating conditions, helping maintain a protective lubricating effect when the engine is subjected to increased mechanical stress.

The product is particularly recommended for engines exposed to high engine-oil loads and elevated temperatures, and PROFI-CAR also identifies severe oil dilution caused by cold operation and frequent short trips as an application area.

PROFI-CAR recommends adding the product to warm engine oil immediately after an oil change. The official product page states that the treatment is suitable for approximately 4–6 litres of engine oil, while the technical product information specifies an approximate additive ratio of 5%.

Recommendation for:

• Engine oils requiring additional friction and wear protection
• Engines subjected to high oil loads and high temperatures
• Applications where reduced friction is desired
• Engines exposed to severe oil dilution caused by cold operation and frequent short trips
• Use immediately after an engine oil change
• Engine applications where smoother running and additional long-term protection are desired

Key Benefits:

• High-performance engine oil additive with MoS2
• Forms a highly load-bearing lubricating film
• Reduces friction between sliding and friction surfaces
• Helps reduce engine wear
• Improves wear protection
• Supports lubrication during cold starts
• Provides additional protection under demanding operating conditions
• Helps improve high-temperature operating reliability
• Can reduce fuel consumption
• Can reduce oil consumption
• Helps lower toxic emissions
• Promotes smoother engine operation
• Supports long-term engine protection

Product Specifications:

These specifications are based on the current official PROFI-CAR product page: www.profi-car.com

How to Use:

1. Change the engine oil according to the vehicle manufacturer’s maintenance procedure.
2. Warm the engine oil.
3. Shake the product well before use.
4. Add the required amount of PROFI-CAR MOTOR OIL ADDITIVE + MoS2 to the warm engine oil.
5. PROFI-CAR specifies an approximate concentration of 5%, with the product page indicating suitability for approximately 4–6 litres of engine oil.
6. Start the engine and allow the additive to circulate normally through the lubrication system.

FAQ:

What is PROFI-CAR MOTOR OIL ADDITIVE + MoS2?

It is a high-performance engine oil additive containing molybdenum disulfide (MoS2) designed to reduce friction and wear and improve the protective properties of engine oils.

What is MoS2?

MoS2 (molybdenum disulfide) is a solid lubricant that PROFI-CAR uses to create a load-bearing lubricating film on friction and sliding surfaces inside the engine.

Does it reduce engine wear?

Yes. Reducing wear and improving wear protection are among the primary functions stated by PROFI-CAR.

Can it reduce friction?

Yes. The manufacturer specifically states that the product reduces friction and improves the coefficient of friction.

Does it help during cold starts?

Yes. PROFI-CAR states that the extremely fine MoS2 particles help provide lubrication during cold starts.

Can it reduce fuel consumption?

PROFI-CAR states that the additive can help reduce fuel consumption.

Can it reduce oil consumption?

Yes. Reduced oil consumption is listed among the product’s properties in the official technical information.

When should the additive be added?

PROFI-CAR recommends adding it to warm engine oil, immediately after an oil change.

How much engine oil can one treatment cover?

The current product page states that the treatment is suitable for approximately 4–6 litres of engine oil.

Is it a replacement for engine oil?

No. It is an additive designed to be mixed with engine oil and is not a substitute for the correct engine oil specified by the vehicle manufacturer.